Product navigation
- PP/PE BAR EXTRUDER
- PVC U type edge sealing unit
- PVC,PU Polyurethane Fire-fighting Water Belt Unit
- PVC, TPV seal strip series extruder
- PVC single screw side strip sealing unit
- PVC Granulator
- PVC profile production unit
- SHR series high speed mixer
- SJSZ conical twin screw extruder
- SJ series single screw extruder
- YF wood plastic gusset set
- Edge embossing machine
- Rewinding machine
- HAUL-OFF MACHINES
- FIVE-ROLLER COOLING MACHINE WITH BLOWER
- Small co-extruder
- COLOR MATCHING MACHINE
Online customer service
QQ customer service
WeChat customer service
Scan QRcode
Contact Details
Janny Ni：+86 13861695773
email：78414909@qq.com
WeChat customer service
Scan QRcode
Contact Details
Janny Ni：+86 13861695773
email：78414909@qq.com
Recommended products
PVC, TPV seal strip series extruder
PVC, TPV seal strip series extruder
◆ Technical parameter
| Model | Screw diameter |
Ratio of length to diameter of screw |
Maximum speed of screw |
Extrusion volume |
Motor power |
Central Height |
| SJ-30/25 | φ30 | 25∶1 | 50r/min | ≥15kg/h | 4kw | 1000mm |
| SJ-30/28 | φ30 | 28∶1 | 50r/min | ≥25kg/h | 5.5kw | 1000mm |
| SJ-30/30 | φ30 | 30∶1 | 50r/min | ≥25kg/h | 7.5kw | 1000mm |
| SJ-45/25 | φ45 | 25∶1 | 50r/min | ≥30kg/h | 7.5kw | 1000mm |
| SJ-45/28 | φ45 | 28∶1 | 50r/min | ≥35kg/h | 11kw | 1000mm |
| SJ-45/30 | φ45 | 30∶1 | 50r/min | ≥35kg/h | 15kw | 1000mm |
| SJ-65/25 | φ65 | 25∶1 | 50r/min | ≥80kg/h | 18.5kw | 1000mm |
| SJ-65/28 | φ65 | 28∶1 | 50r/min | ≥80kg/h | 22kw | 1000mm |
| SJ-65/30 | φ65 | 30∶1 | 50r/min | ≥80kg/h | 30kw | 1000mm |
| SJ-90/25 | φ90 | 25∶1 | 50r/min | ≥140kg/h | 30kw | 1000mm |
| SJ-90/30 | φ90 | 28∶1 | 50r/min | ≥140kg/h | 55kw | 1000mm |
| SJ-120/25 | φ120 | 25∶1 | 40r/min | ≥200kg/h | 75kw | 1000mm |
| SJ-150/25 | φ150 | 25∶1 | 40r/min | ≥300kg/h | 110kw | 1000mm |
Recommended reading
What are the technical points of extruder?What are the technical points of extruder? 1. During the extrusion process, the material changes fro
The role of the extruder three functional areasToday small make up to share the role of the extruder three functional areas. Generally, under norma
Common problems of extruder and the method to deal with screw heatingCommon problems of extruder and the method to deal with screw heating. 1, reamer serious wear. The g
What do you need to know about extruder?According to the direction of material flow and the included Angle of the center line of the screw,
Abrasion of feeding roller caused by extruder failureAbrasion of feeding roller caused by extruder failure. As the extruder is made of metal and has high
Common faults of extruders and abnormal noise in handling methodsAccording to the direction of material flow and the included Angle of the center line of the screw,
