◆ Performance and usages
This machine is mainly used for extrusion of thermoplastic plastics such as soft and hard polyvinyl chloride, polyethylene and polypropylene, with corresponding auxiliary machines (including molding head), which can process a variety of plastic products, such as mo, tube, rod, plate, wire, cable insulation layer and hollow products, and also for granulation.
Advanced design, high output, good plasticization, low energy consumption, ZLYJ series of extruder hard gear reducer drive, with low noise, smooth operation, large bearing capacity, long life and other characteristics.
◆ Technical parameters
Model | Screw Diameter |
Screw Ratio | Screw Speed | Plasticizing capacity |
Motor power |
Center height |
SJ-30/25 | φ30 | 25∶1 | 50r/min | ≥15kg/h | 4kw | 1000mm |
SJ-30/28 | φ30 | 28∶1 | 50r/min | ≥25kg/h | 5.5kw | 1000mm |
SJ-30/30 | φ30 | 30∶1 | 50r/min | ≥25kg/h | 7.5kw | 1000mm |
SJ-45/25 | φ45 | 25∶1 | 50r/min | ≥30kg/h | 7.5kw | 1000mm |
SJ-45/28 | φ45 | 28∶1 | 50r/min | ≥35kg/h | 11kw | 1000mm |
SJ-45/30 | φ45 | 30∶1 | 50r/min | ≥35kg/h | 15kw | 1000mm |
SJ-65/25 | φ65 | 25∶1 | 50r/min | ≥80kg/h | 18.5kw | 1000mm |
SJ-65/28 | φ65 | 28∶1 | 50r/min | ≥80kg/h | 22kw | 1000mm |
SJ-65/30 | φ65 | 30∶1 | 50r/min | ≥80kg/h | 30kw | 1000mm |
SJ-90/25 | φ90 | 25∶1 | 50r/min | ≥140kg/h | 30kw | 1000mm |
SJ-90/30 | φ90 | 28∶1 | 50r/min | ≥140kg/h | 55kw | 1000mm |
SJ-120/25 | φ120 | 25∶1 | 40r/min | ≥200kg/h | 75kw | 1000mm |
SJ-150/25 | φ150 | 25∶1 | 40r/min | ≥300kg/h | 110kw | 1000mm |