- PP/PE BAR EXTRUDER
- PVC U type edge sealing unit
- PVC,PU Polyurethane Fire-fighting Water Belt Unit
- PVC, TPV seal strip series extruder
- PVC single screw side strip sealing unit
- PVC Granulator
- PVC profile production unit
- SHR series high speed mixer
- SJSZ conical twin screw extruder
- SJ series single screw extruder
- YF wood plastic gusset set
- Edge embossing machine
- Rewinding machine
- HAUL-OFF MACHINES
- FIVE-ROLLER COOLING MACHINE WITH BLOWER
- Small co-extruder
- COLOR MATCHING MACHINE
WeChat customer service
Scan QRcode
Contact Details
Janny Ni：+86 13861695773
email：78414909@qq.com
Features:
1. The head adopts layered spiral mandrel type, which can rotate continuously 360 degrees.
2, fast net change device reasonable structure, easy to replace the filter, reliable use.
3, the unit is equipped with various functional components: recording device, longitudinal cutting device, cooling water row, flattening roll, edge retracting device, etc.
USES:
Three-layer plastic co-extrusion blow molding compound film unit is developed by our factory according to the market demand. It can continuously blow LDPE, HDPE, LLDPE, MLLDPE and PA packaging films with a folding width of 800/1500 mm and a thickness of 0.08 mm by flat extrusion blowing method. Because of its good barrier, moisture, moisture, moisture, rain, wind, frost, oxygen, oil resistance, so can be widely used in weight packaging, such as all kinds of fresh fruit, meat, pickles, fresh milk, liquid drinks.
What are the technical points of extruder?What are the technical points of extruder? 1. During the extrusion process, the material changes fro
The role of the extruder three functional areasToday small make up to share the role of the extruder three functional areas. Generally, under norma
Common problems of extruder and the method to deal with screw heatingCommon problems of extruder and the method to deal with screw heating. 1, reamer serious wear. The g
What do you need to know about extruder?According to the direction of material flow and the included Angle of the center line of the screw,
Abrasion of feeding roller caused by extruder failureAbrasion of feeding roller caused by extruder failure. As the extruder is made of metal and has high
Common faults of extruders and abnormal noise in handling methodsAccording to the direction of material flow and the included Angle of the center line of the screw,
